Savas Tuning Systems

SAVAS TUNING SYSTEMS INC. 17843 SE McLoughlin BLVD Milwaukie, OR 97267 503-653-0022

CUSTOM CARBURETOR, DISTRIBUTOR, & INJECTION SYSTEM INFORMATION FORM

This form is designed to gather critical information to help us HELP YOU! Based on data provided below we can choose, design, build, and/or customize fuel & ignition products and systems. IF you cannot complete this form & would like us to do it for you, then complete as much as you can and we will quote you an approximate cost to complete what is necessary.

If you do not know all of the information requested in this form off the top of your head, and would rather print out a copy of the form to fill out later, see our printer-friendly version of this form.

When you have completed the online form, please use your browser's "Back" button to return to the page last visited.

WHAT SERVICE OR PRODUCT NEEDED?
DOLLAR AMOUNT BUDGETED? (the best is not always practical or affordable!)
YEAR, MAKE, MODEL OF VEHICLE
ENGINE SIZE ci.
CYLINDERS
INTAKE MANIFOLD (make,year,number of barrels,bolt pattern)
CHOKE PROVISION TYPE (hot air,therm. spring)
ENGINE EXHAUST (cast iron manifolds,headers,size)
VEHICLE EXHAUST (size,muffler type)
CAMSHAFT(advertised duration)
CAMSHAFT(duration @ .050" lift)
MAXIMUM RPM YOU WANT THIS ENGINE TO TURN
MINIMUM RPM YOU WANT THIS ENGINE TO WORK
RPM THIS ENGINE TURNS AT 55MPH
AT 65MPH
AIR CLEANER TYPE
VACUUM THIS ENGINE HAS AT IDLE
AT 2500RPM
TRANSMISSION TYPE
CONVERTER STALL
REAR END GEAR RATIO OR FINAL DRIVE
COMPRESSION RESULT AT 5 PUMPS
AT 7 PUMPS
ACTUAL COMPRESSION RATIO
TYPE OF GASOLINE OR FUEL
IS THIS FOR OFF ROAD USE?
WHICH EMISSION DEVICES DOES THIS VEHICLE HAVE? (check all that apply): PCV EGR EFE AIR COMPUTER CATALYST
WILL VEHICLE OPERATE ON HIGHWAY?
OFF-ROAD USE ONLY?
TIRE SIZE
GROSS VEHICLE WEIGHT
TRAILER WEIGHT
YOUR MOST IMPORTANT CONCERN (check one only): POWER FUEL ECONOMY
YOUR 2ND MOST IMPORTANT (check one only): POWER FUEL ECONOMY

COMMENTS OR ADDITIONS

Please understand that our service is unique & the equipment and overhead costs are expensive. We only get paid for what work we accomplish. In effort for us to survive as a business and as individuals we must charge for professional advice, consultations, and service . . . THANK YOU!
A consultation fee of $20.00 will cover the first 30 minutes, $50.00 per hour thereafter.
Shop rate for custom work is $75.00 per hour, flow bench testing is $100.00 per hour (basic tests usually $20-$40).
Dyno time quoted on individual basis! On site time negotiable (race events, off location, etc.)

CONTACT INFORMATION:

YOUR NAME:

PHONE NUMBER:

E-MAIL ADDRESS: